JAT910　MANUAL

Chapter I.　INTRODUCTION

• TOYOTA AIR JET WEAVING MACHINE Model JAT910

Chapter S.　SAFETY

• S.1　Safe Work
• S.2　Optical Safety Sensor(Option)

Chapter 0.　PREPARATION

• 0.1　Preparations for Weaving Start-up
• 0.2　SC Inverter (Option)
• 0.3　Group Inverter

Chapter 1.　OPERATION AND START-UP PROCEDURE

• 1.1　Startup Guide
• 1.2　Explanation of the details of the function panel

Chapter 2.　LET-OFF MOTION

• 2.1　Single-beam Let-off Motion
• 2.1A　Single-beam (Torsion Back Specification)(Option)
• 2.2　Twin-beam Let-off Motion
• 2.3　Double-beam Let-off Motion
• 2.4　Stop Mark Preventions

Chapter 3.　CLOTH TAKE-UP MOTION

• 3.1　Electronic Control Take-up Motion
• 3.2　Mechanical Take-up Motion (Option)
• 3.3　Temple
• 3.4　Rotary Solenoid-driven LH Weft Cutter
• 3.4A　Mechanical LH Weft Cutter (Option)
• 3.4B　Air Cylinder-driven LH Weft Cutter (Option)
• 3.4C　Weft Cutter (Rotary Solenoid Type/Glass Specifications)(Option)
• 3.5　RH Weft Cutters
• 3.6　Weft Cutter for Center Selvage(Option)
• 3.7　Servo Motor Type Cloth Tension Control Takeup Unit (Option)
• 3.7A Air Cylinder-controlled Cloth Take-up Motion (Intelligent Tension Control ITC) (Option)
• 3.7B Stepping Motor Type Tension Control Take-up Unit (ITC) (Option)

Chapter 4.　SHEDDING MOTION

• 4.1　Negative Tappet Cam Shedding Motion
• 4.2　Crank Shedding Motion
• 4.2A Revised edition　Multi-link Crank Shedding Motion (LM) (Option)
• 4.2B Crank Shedding Motion (LW Type)
• 4.2C Single-harmonic Crank Shedding Motion (LS) (Option)
• 4.3　Electronic Shedding Motion
• 4.4　Dobby
• 4.5　Stäubli Positive Cam Shedding Motion
• 4.6　Jacquard

Chapter 5.　WEFT INSERTING MOTION

• 5.1　Weft Inserting Motion (Electric Drum Type)
• 5.2　Arbitrary 4-color Shift
• 5.3　Arbitrary 6-color Shift
• 5.4　Arbitrary 8-color Shift
• 5.5　Multi-Tandem (Option)
• 5.6　Oscillatory Electric Drum (Option)
• 5.8　LH Clamp Roller (Option)
• 5.9　Two-level Sub-pressure Switching System (Option)
• 5.10　Toyota Automatic Pick Operator (TAPO) (Option)
• 5.11　Automatic Bobbin Changer Device for Glass Fiber Weaving (Option)
• 5.12　Automatic Brake System (ABS) (Option)
• 5.12A　ABS for Glass Fiber Yarn Weaving (Option)
• 5.12B　Servo ABS (Option)
• 5.13　Automatic Pick Controller (EPC, EPCm) (Option)
• 5.13A　EPC-P and EPCm-P (Weft automatic Feed Motion) (Option)
• 5.13B　Automatic Pick Timing Controller (ATC)
• 5.14　P-MONITOR (Option)
• 5.15　Weft Insertion Drum Automatic Changer AIC (Automatic Insertion Command) (Option)
• 5.16　Stretch Yarn Weft Protectors (Option)

Chapter 6.　BEATING MOTION

• 6.1　Beating Motion

Chapter 7.　DETECTORS

• 7.1　Toyota's Six-row Dropper-type Warp Detector
• 7.2　Weft Feelers
• 7.3　i-SENSOR
• 7.4　Multi Insertion (Supply) Sensor (Option)

Chapter 8.　SELVAGE FORMING DEVICE

• 8.1　Full-leno Selvage Device
• 8.2　Electronically Controlled Leno Selvage Motion (Option)
• 8.3　Half-leno Selvage Device (Klöcker) (Option)
• 8.4　Electronically Controlled Selvage Motions (Option)
• 8.5　Tuck-in Device (Electromagnetic valve drive) (Option)
• 8.6 Air Tuck-in Device (Non-cut reed) (Option)
• 8.7 Air Tuck-in Device (for Towel Weaving) (Option)
• 8.8　Waste Selvage Device
• 8.9　Warp-addition Device (Option)

Chapter 9.　INSTRUMENTATION

• 9.1　Instrumentation
• 9.2　Troubleshooting for Electronics
• 9.3　LED Lighting (Option)

Chapter M.　MAINTENANCE

• M.1　Maintenance
• M.2　Disassembly/Reassembly/Adjustment
• M.3　Lubrication

Chapter G.　GAUGES AND TOOLS

• G.1　Gauges
• G.2　Tools
• G.3　Measuring Instruments

Chapter T.　WEAVING TECHNOLOGY

• T.1　Weaving Standards
• T.2　Operation Management/Weaving Troubleshooting

Chapter AP.　Appendix

• Appendix 1. Handling of Heald Frames
• Appendix 2. Glass Fiber Weaving
• TOYOTA AIR JET WEAVING MACHINE Towel Loom Model JAT910